Hi everyone,

Welcome to our website!

For customers new to the camper trailers, they may not know exactly how to mount the camper trailer tent to the camper trailers.

There are mainly the following items connect the camper trailer and tents together, they are latch and hooks, hinges, gas struts and gas strut mounting brackets.

1. Hinges are the main parts to connect the camper trailer tent and camper trailer together.

There are hinges welded on both the camper trailer and the camper trailer tent steel frame. (There is a steel frame under the camper trailer plywood bed board, this steel frame will connect and seal with the trailer box top. ) There will be a strong pin go through the hinges and connect the camper trailer and camper trailer together.

2. The latches and hooks are to fasten and lock the camper trailer tent to the camper trailer.

There are two latches welded on the trailer box, and two hooks welded on the camper trailer steel frame to match with the latches.

3. The gas struts will help you to open the tent bed board when you want to open the tent lid to fetch something from inside of the trailer box.

There are gas struts welded on the trailer, and we will also supply you the bolted type gas struts for you to bolt on the tent bed board frame. These brackets are for mounting the gas struts.

With all these three items are well finished, then you have successfully mounted the tent onto the trailer.

If you still have any questions or problems, please feel free to contact our sales, we believe you will receive a  satisfied answer.

Thank you very much for your visiting .