Hot dipped galvanized mower trailer RC-CMT-01

Trailer specification

Trailer size box size: 2100*1450mm

Mower holder size: 1880*1000mm

Drawbar tube: 100*50*4mm

Trailer chassis main frames: 70*50*3mm

Trailer chassis cross beams: 50*50*2.5mm

ATM: 750kgs to 1500kgs according to the loading capacity requirements

Trailer body construction and materials

Mower holder: 2.5mm steel checker plate.

Loading ramp: 2.5mm steel checker plate

Trailer side walls, front wall & tailgate:

2.5mm steel checker plate as standard;

(Other designs are optional, such as 1.5mm flat steel sheet folded; 2.0mm, 3.0mm checker plate side walls.)

Standard box height is 300mm; box height of 350mm, 450mm, 600mm are optional.

Trailer floor:

2.5mm thick steel checker plate welded onto chassis;

(Other designs are optional, such as 3.0mm steel checker plate floor.)

Trailer mudguards:

2.5mm steel checker plate as standard;

(Other designs are optional, such as 1.5mm flat steel mudguards.)

Footstep: steel frame with mesh.

Front wall of trailer box is detachable.

 Trailer tailgate is detachable and can be opened downwards or swing to the left according to customers’ requests.

Trailer light bracket offers better protection for taillights.

Trailer suspension and wheel

Standard 40mm solid round axle; (45mm, 50mm solid round or square axles are optional.)

Standard single axle trailer is with no brake. (Mechanical brake, Electric brake or hydraulic brake can be supplied upon customers’

special requirements.)

Standard 4-leaf eye-to-eye springs for single axle mower trailers.

Wheels: 2*175R14C tires (DOT certified), white powder coated steel rims as standard.

Trailer details and accessories

Safety chains: hot dipped galvanized, comply with Australian/New Zealand standard, with standard markings

Coupler: Australian standard 50mm ball coupling with Australian standard markings, complies with Australian standard;

1-7/8” ball casted coupling for New Zealand Market;

Jockey Wheel: swing up type with solid wheel

Trailer electric set-up

LED tail Lights and number plate lights (ADR approved or with E-mark)

7-pin plug: flat or round plugs available for choice

Wiring: standard 5-core wire cable

Cages

Steel tube: 30x30x2mm

Steel mesh is crimped type;

Steel mesh hole: 70*50*4mm

Standard cage height: 1000mm; height of cage 600mm, 900mm are optional.

The front and tailgate of the cage are of steel mesh;

The left and right side have frames only (no mesh), because customers will add plywood wall or plastic wall onto the left and right.

side by themselves. (Plywood wall or plastic wall are sourced by customers themselves)

The tailgate of cage is of two pieces, which can be opened to both sides.