Hot-dipped Galvanized Soft Floor Camper Trailer RC-CPT-07 (BM)
Trailer surface finish
Fully hot dip galvanized 7x4 camper trailer (the best anti-rust finish compared with powder coated or painted finish)
Trailer size and weight
Box deep: 500mm
Box top from ground: 1100mm approximately
Tare mass: 540kg
Trailer body construction and materials
Aluminum front and rear 3mm thick checker plate panels (reduce tare weight of the trailer)
Fully hot galvanized steel checker plate trailer box as well as side steps and mudguards, steel thickness: 3mm
Full 70x50x2.5mm RHS chassis and cross beams
100x50mm draw bar with reinforcement bar welded underneath for the toughest ride
Extended draw bar with a total length of 2000mm (excluding coupling) for easy corner turning; the length of the draw bar from the front trailer box panel to the front end of the draw bar is 1470mm.
Full size side steps
Trailer suspension and wheel
45mm solid round axle, 10" drum hub with heavy duty Ford bearing (LM), 6 stud Landcruiser pattern
10" electric brake + hand brake
6 Leaf x 8mm (plate thickness) x 45mm long span off road eye-to-eye shackle spring with shock absorbers
Off road all terrain wheels: 3x15” wheels, steel powder coated rims and 235/75R15 tires (DOT certified), 6-stud pattern, including 1x Spare wheel on front drawbar.
Trailer details & accessories
1. Safety chains: hot dip galvanized, comply with Australian standard, with Australian standard markings
2. Australia standard Orac type hitch, complies with Australian standard, with Australian standard markings
3. Jockey Wheel - swing up type with 8” solid wheel
4. Large PVC mesh stone guard
5. 2 Jerry can holders (front side steps), 2 gas bottle holders (rear side steps)
6. Checker plate Aluminum Toolbox 1200X450X480mm (Model: ATB), thickness: 2.0mm.
7. Gas struts for easy lifting up the tent.
8. Wind down rear stabilizer legs + raising/lowering tool
9. Number Plate Holder
10. Rear receiver for bike carrying rack
11. Weather proof Tent Mounting Hardware (Hinges, hooks and Latches)
12. Carpet applied in the trailer.
Trailer kitchenette
70L stainless steel water tank with electric pump
Full stainless steel kitchen, stainless steel sink (14cm deep) with drainer and hose.
Comes with side tap and lockable aluminum water filler
Trailer electric set-up
LED tail Lights and number plate lights
7-pin plug: flat or round plugs available for choice
Wire cable: standard 6-core wire cable
Attention
Trailers can be built as per customer’s special requirements
The tent specification is as per RC-T6003 with single annex, with 14OZ canvas RIP-STOP, more annex can be added at extra costs.
Jerry cans, Gas stove/ burners can be supplied at extra cost,
Gas bottles are not supplied.
Optional
360 degree Treg Poly Block hitch coupler
